Mifare badge reader PIN Keyboard Card Reader
Mifare badge reader PIN Keyboard Card Reader
Specification
@ Wiegand 26bits/ Wiegand34bits Standard Format Data Output
@ Support ID (125 kHz), Mifare(13.56MHz) Card or PIN Opening Door Mode.
@ Less than 0.2 second Response Speed
@ Less than 0.5 seconds Proximity Time Distance:
@ 2-15cm Proximity Range
@ -25º C to 75º C Ambient Temperature
@ 10%-90% Ambient Humidity
@ Built-in Antenna
@ Built-in LED (Double Color LED)
@ Built-in Loud Speaker (Buzzer)
@ DC 5V-16V Working Voltage. Standard Direct Current 12V
@ 70mA Working Current
@ 100 Meters Communication Distance
@ Real Time Data Transfer
@ Light Yellow
@ PVC Case Material (Black Resin for Water-Proof Function)
@ Size :114*76*16(mm)
Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red +12V
Black Wire GND
Blue Wire DATA1
White Wire DATA0
Green Wire Green LED
Brown Wire Buzzer
Welcome to contact us fore samples.
If you want to ask anything just fill in the form below and send us. We will contact you within 12 hours.
Stand Alone Access Control RFID card reader for door entry systems
More >>RFID proximity card reader kit RFID card reader with keypad
More >>Wiegand34 RFID Smart Card Reader Door Access Controller
More >>